300N, extended length 239mm, Hahn-Gasfedern GmbH Art.Nr. 188872.1 Suggested sources? None yet available from Schempp-USA. Seems like there should be some US sources for these parts. Thanks in advance. Ken Sorenson

On Friday, January 10, 2020 at 9:02:52 AM UTC-6, Ken Sorenson wrote:
> 300N, extended length 239mm, Hahn-Gasfedern GmbH Art.Nr. 188872.1 Suggested sources? None yet available from Schempp-USA. Seems like there should be some US sources for these parts. Thanks in advance. Ken Sorenson

Oops Corrected Art. Nr 1107437.

On Friday, January 10, 2020 at 7:08:18 AM UTC-8, Ken Sorenson wrote:
> On Friday, January 10, 2020 at 9:02:52 AM UTC-6, Ken Sorenson wrote:
> > 300N, extended length 239mm, Hahn-Gasfedern GmbH Art.Nr. 188872.1 Suggested sources? None yet available from Schempp-USA. Seems like there should be some US sources for these parts. Thanks in advance. Ken Sorenson
>
> Oops Corrected Art. Nr 1107437.

Ken,

You can probably get one here:

https://www.acecontrols.com

You will need to specify both the extended, retracted lengths, rod dia, cylinder dia,end fittings,and newtons.

Richard
www.craggyaero.com

On Friday, January 10, 2020 at 9:20:52 AM UTC-6, Richard Pfiffner wrote:
> On Friday, January 10, 2020 at 7:08:18 AM UTC-8, Ken Sorenson wrote:
> > On Friday, January 10, 2020 at 9:02:52 AM UTC-6, Ken Sorenson wrote:
> > > 300N, extended length 239mm, Hahn-Gasfedern GmbH Art.Nr. 188872.1 Suggested sources? None yet available from Schempp-USA. Seems like there should be some US sources for these parts. Thanks in advance. Ken Sorenson
> >
> > Oops Corrected Art. Nr 1107437.
>
> Ken,
>
> You can probably get one here:
>
> https://www.acecontrols.com
>
> You will need to specify both the extended, retracted lengths, rod dia, cylinder dia,end fittings,and newtons.
>
> Richard
> www.craggyaero.com

Richard Thanks! I can get close using their configuration tool and catalog. May have to go this route and then modify it. Excellent tip.

I've had luck here
https://www.mcmaster.com/struts

Years back I needed the canopy gas spring for my LAK-17a.Â* With some
digging on the internet I was able to cross reference it with the hood
(bonnet) lift spring used on the mid-90s 7-series BMW.Â* Picked one up at
the local Autozone.



On 1/10/2020 9:38 AM, wrote:
> I've had luck here
> https://www.mcmaster.com/struts

--
Dan, 5J

Hi Ken - I've used Bansbach a few times (also original equipment on some gliders):
http://www.bansbach.com/Bansbach/index-usa.html?gclid=CjwKCAiA3uDwBRBFEiwA1VsajKn1DYWhlk1 OjnynK08tmpYTJRPAhNKVNbej0nByGP8fnstdhdhtaBoCcDwQA vD_BwE